News
Case Study
Delcam software overcomes Onkar's problems with quality and delivery
Adding Delcam’s Power Solution CADCAM software has enabled Indian sheet metal specialists Onkar Dies Pvt. Ltd to bring its press tool design and manufacture in-house and so overcome problems with quality and delivery times.
More case studies >>- You are here:
- Home
- »
- PowerMILL Modelling
- »
- PowerMILL Modelling Video Links
PowerMILL Modelling - Video Links
Select any of the links below to view each video:
Align using a Workplane. Take a part that is currently in car line and rotate it to line-of-draw by adding a user defined datum. |
 |
| Cover a simple area. Simplify machining over an area that will be spark eroded by modifying the trim boudaries of the surrounding surfaces. | |
| Create a cap surface. Cover a complex area with a fill-in surface. This fill-in is tangent continuous with the surrounding surfaces. | |
| Round off a sharp edge. Create a complex fillet over multiple surfaces to round off a sharp edge. | |
| Re-trim the ends of a complex fillet. Trim the ends of a complex 3D fillet to the surrounding faces. | |
| Create a split-surface. Create a single complex split surface by simply selecting the horizon curve of the part. The edges of the split surface may then be trimmed to the extents of the die insert. | |
| Adding draft to ensure a part can be moulded. Modify a complex region to ensure it has sufficient draft for moulding. | |
| Creating a reference surface for multi-axis machining. Create a tapered extrusion surface to control tool motion during 5-axis milling. | |
| Creating a shroud surface for a bladed disk. Generate a surface revolution representing the blank from which a blisk will be machined. | |